Back to jobs

Refrigeration Technician

United States- Carlstadt, New Jersey

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.

Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor.

Maintenance & Repair

  • Performs expert-level preventive maintenance (PM) and break-fix repairs on high-capacity industrial refrigeration systems, including:
    • Parallel compressor rack systems and associated suction/discharge headers
    • Evaporative cooling towers (counterflow and crossflow), closed-circuit fluid coolers, and condenser water systems
    • Process chillers (air-cooled and water-cooled), evaporators, and heat exchangers
    • Commercial and industrial walk-in coolers, freezers, and refrigerated process equipment
    • Refrigerant metering devices including TXVs, EEVs, and fixed-orifice systems
  • Identifies and resolves root causes of equipment failures through systematic diagnosis — including refrigerant pressure/temperature analysis, superheat/subcooling measurements, oil analysis, and electrical load testing
  • Performs refrigerant handling, recovery, reclaim, and recharge operations in strict compliance with EPA Section 608 regulations; maintains accurate refrigerant usage and leak rate records
  • Executes leak detection and repair on high-charge systems using electronic detectors, UV dye, and nitrogen pressure testing protocols
  • Inspects, cleans, and restores cooling tower components including fill media, drift eliminators, water distribution systems, float valves, basin structures, and drive systems
  • Replaces and repairs system components including compressors, condensers, evaporator coils, expansion valves, solenoid valves, pressure controls, hot gas bypass assemblies, and defrost systems
  • Performs brazing, soldering, and refrigerant piping work following nitrogen purge best practices to prevent internal oxidation

Controls & Electrical

  • Troubleshoots and repairs complex refrigeration control systems including rack controllers, electronic expansion valve drivers, defrost controllers, and building automation system (BAS) integration points
  • Diagnoses and resolves electrical faults in 3-phase motor circuits, compressor contactors, variable frequency drives (VFDs), control transformers, and low-voltage control wiring
  • Interprets wiring schematics, ladder diagrams, P&IDs, and control panel layouts
  • Interfaces with PLC-based and proprietary rack controllers (e.g., Copeland CoreSense, Hussmann HMC, Danfoss AK-CC) for setpoint adjustment, alarm diagnostics, and data trending
  • Works with site engineering or controls teams to resolve communication and integration issues between refrigeration equipment and local control networks or SCADA systems

Water Treatment & Cooling Tower Operations

  • Monitors and maintains cooling tower water chemistry including pH, conductivity, cycles of concentration, biocide levels, and corrosion inhibitor dosing in coordination with the water treatment program
  • Executes blowdown procedures and evaluates makeup water consumption to maintain system efficiency and prevent scale, corrosion, and Legionella risk
  • Complies with site Legionella Water Management Plan (WMP) requirements and documents all water system inspections and treatments

Predictive Maintenance & Reliability

  • Utilizes predictive maintenance tools including vibration analysis, ultrasonic leak detection, infrared thermography, and oil sample submission to identify developing failures before breakdown
  • Monitors refrigeration system trends (compressor amp draw, superheat/subcooling, pressure differentials, oil levels, condenser approach temperatures) and makes proactive maintenance recommendations
  • Maintains accurate work records in the Computerized Maintenance Management System (CMMS); reviews equipment history to identify repeat failure patterns and drive reliability improvements

Planning, Training & Continuous Improvement

  • Collaborates with the Planner/Scheduler to develop, refine, and optimize PM procedures, frequency, and scope for refrigeration assets
  • Identifies and sources replacement parts, refrigerants, lubricants, and consumables; evaluates alternative components for improved cost or reliability
  • Mentors and provides on-the-job technical training to junior and mid-level technicians; documents technical procedures for knowledge transfer
  • Leads and participates in continuous improvement (CI) activities targeting energy reduction, reliability improvement, and refrigerant loss minimization
  • Evaluates aging equipment and contributes technical input to capital repair/replacement decisions

Safety & Compliance

  • Follows all applicable safety policies, OSHA regulations, and site-specific rules including lockout/tagout (LOTO), confined space entry, arc flash PPE, fall protection, and hot work permitting
  • Adheres to all EPA Section 608 refrigerant handling and recordkeeping requirements; supports refrigerant inventory management and leak rate monitoring
  • Complies with ASHRAE 15 safety standards for refrigerant system operation, ventilation, and emergency procedures
  • Maintains awareness of A2L refrigerant transition requirements (R-454B, R-455A, R-32) and associated safety protocols including flammability controls and sensor requirements
  • Identifies and reports unsafe conditions, near-misses, and potential regulatory concerns to supervision promptly

Required Knowledge, Skills & Qualifications

Education & Experience

  • High school diploma or GED required; Associate's degree or technical certificate in HVAC/R, Refrigeration Technology, or a related field preferred
  • Minimum 7 years of hands-on experience in industrial or commercial refrigeration, with at least 3 years on high-capacity systems (100+ tons, compressor racks, cooling towers, or process chillers); or Associate's degree in a relevant technical field with a minimum of 5 years of equivalent experience
  • Demonstrated experience troubleshooting refrigeration systems under pressure able to work through complex, multi-variable problems independently

Certifications (Required)

  • EPA Section 608 Universal Certification (mandatory, legally required for refrigerant handling)
  • Valid driver's license

Certifications (Preferred / Highly Valued)

  • RETA (Refrigerating Engineers & Technicians Association) - CARO or CIRO certification
  • NATE (North American Technician Excellence) certification in refrigeration or light commercial/commercial
  • State HVAC/R journeyman or contractor license (where applicable)
  • OSHA 10 or OSHA 30 General Industry
  • Cooling Technology Institute (CTI) training or equivalent cooling tower certification

Technical Knowledge

  • Deep understanding of the vapor-compression refrigeration cycle, including superheat/subcooling theory, pressure-enthalpy relationships, and system performance benchmarking
  • Proficiency with digital manifold sets, micron gauges, clamp-on ammeters, and pipe-clamp thermometers
  • Working knowledge of cooling tower thermodynamics including wet bulb approach, range, cycles of concentration, and evaporative cooling principles
  • Familiarity with current and transitional refrigerants including R-404A, R-22 (legacy), R-410A, R-507, and A2L alternatives (R-454B, R-455A, R-32, R-290)
  • Basic electrical competency: ability to read wiring diagrams, measure voltage/amperage/resistance, and safely diagnose 3-phase motor circuits
  • Comfortable with CMMS platforms (SAP PM, Maximo, MP2, or similar) for work order management and history review

Physical Demands & Working Conditions

The physical requirements below are representative of those that must be met to successfully perform the essential functions of this position. Reasonable accommodation may be made for individuals with disabilities.

  • Frequent standing, walking, kneeling, stooping, and crouching in mechanical rooms, rooftops, and equipment areas
  • Frequent use of hands and fingers for tool operation, component installation, and control device manipulation
  • Must be capable of climbing ladders, scaffolding, and elevated platforms; comfort at heights required for rooftop and cooling tower work
  • Occasional confined space entry (basins, vessels, tunnels) following site permit-required confined space procedures
  • Must be able to safely lift and/or move up to 50 lbs unassisted; heavier lifts performed with mechanical assistance or team lift
  • Regularly required to use close vision, color vision, and the ability to adjust focus (for reading gauges, wiring diagrams, and control displays)
  • Exposed to temperature extremes ranging from refrigerated spaces (0°F and below) to hot mechanical rooms and outdoor rooftop environments
  • Regularly exposed to industrial noise levels; hearing protection required in designated areas
  • May be exposed to refrigerants, water treatment chemicals, lubricating oils, and cleaning agents; appropriate PPE provided and required
  • On-call rotation and occasional overtime required to support 24/7 facility operations
  • Minimal travel may be required for training, vendor visits, or multi-site support

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.

Pay Range

$40.11 - $51.32 USD

ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.

ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

 

Create a Job Alert

Interested in building your career at Advanced Technology Services? Get future opportunities sent straight to your email.

Apply for this job

*

indicates a required field

Resume/CV*

Accepted file types: pdf, doc, docx, txt, rtf

Cover Letter

Accepted file types: pdf, doc, docx, txt, rtf

Select...
Select...
Select...

Note: Selecting “no” will not eliminate you from consideration for this role.

Message and data rates may apply, depending on your mobile phone service plan. At any time you can get more help by replying HELP to these texts, or you can opt out completely by replying STOP.

What is your preferred method of communication?

If you’re a match for the role, we’ll reach out to schedule a call—typically by sending a booking link so we don’t miss each other. Please let us know your preferred method of contact for that initial outreach.

Voluntary Self-Identification of Veteran and Disability

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Advanced Technology Services Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

 

Form CC-305
Page 1 of 1
OMB Control Number 1250-0005
Expires 04/30/2026


Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury

 

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Select...
Select...