Principal Power Electronics Engineer
ON.energy is setting the standard for large load interconnection. ON’s patented AI UPS™ is a medium-voltage UPS that serves as a firewall, protecting the data center from the grid, and the grid from the data center. With multiple gigawatts currently under construction, we are enabling grid-safe data centers.
We are hiring a Power Electronics Engineer to own the power conversion system (PCS) in our product, both how it is designed and how it behaves. This is a product-focused role. You will lead PCS product design and documentation, tune inverter controls, lead lab and field testing, and prove ride-through and fault compliance in GFL and GFM modes.
You will work closely with our PCS suppliers' controls teams and with our business development, project, commissioning and O&M engineering teams. You will report to the Senior Power Electronics Manager.
What You Will Do
Controls, testing and grid compliance
- Own inverter control settings. Define, tune and maintain the control and protection parameters for MW-scale PCS in GFL and GFM modes, including current and voltage loops, PLL, droop and virtual impedance, current limiting and overload, and ride-through curves. Maintain a controlled settings baseline per project and per firmware release.
- Lead system testing. Plan and run grid-integration test campaigns at national-lab and third-party facilities, as well as factory (FAT) and site tests. Write test procedures, analyze waveforms and issue reports.
- Prove grid-code compliance. Demonstrate that the system meets LVRT/HVRT, frequency ride-through, phase-jump, fault-current and reactive-current requirements under IEEE 2800, IEEE 1547 / UL 1741 and ERCOT rules, for both the grid-side GFL converter and the load-side GFM converter.
- Analyze fault and weak-grid behavior. Study 3-phase and unbalanced faults, low-SCR operation, paralleled-converter interaction and circulating currents. Recommend control or setting changes and verify them in test.
- Support simulation and HIL studies. Work with our modeling team (PSCAD, OPAL-RT, Typhoon HIL) to define study and HIL test cases, supply settings and test data, review reports, and confirm results match field and lab behavior.
Product and project engineering
- Lead PCS product design. Recommend design approaches and main-equipment vendors, and participate in product design sprints with the development team.
- Serve as technical lead with PCS suppliers. Review firmware releases and change logs, specify required behavior, and qualify new or second-source inverters against a common test set.
- Support business development. Prepare technical proposals, including single-line diagrams (SLDs) and general arrangements (GAs) tailored to customer needs.
- Support project execution. Compile technical information packages for project engineering, co-lead review and validation of PCS topics, and maintain technical documentation, including as-built drawings.
- Support commissioning and O&M. Participate in commissioning, resolve field events from the waveform up, and feed design improvements back into the product.
Required Qualifications
- Bachelor's degree in Electrical Engineering, Power Electronics Engineering or a similar field (MS or PhD a plus)
- 8+ years of hands-on power electronics engineering in project-based or industrial settings
- Proven system-level design experience on MW-scale power electronics equipment
- Understanding of how BESS integrates with power electronics equipment
- Hands-on control design or tuning of three-phase grid-connected inverters: dq current control, PLL and synchronization, and DC-link control
- Working knowledge of grid-forming control (droop, VSG, virtual impedance) and how GFM current limiting differs from GFL
- Direct experience with ride-through and fault behavior of inverter-based resources (LVRT/HVRT, reactive current injection, negative-sequence response) and the grid codes that govern them
- Ability to read and critically review PSCAD/EMT study reports and HIL (OPAL-RT, Typhoon) results, and compare them with measured test data
- Experience planning and running tests on MW-scale inverters or BESS: lab, FAT or site commissioning
- Ability to produce and read SLDs and GA drawings
- Strong waveform and data analysis skills using Python, MATLAB or similar
- Excellent communication across technical and non-technical teams, with clear technical writing for test procedures, reports and settings rationale
Preferred Qualifications
- Experience with BESS, UPS / mission-critical or utility-scale infrastructure projects, including IEC 62040-3 performance classes
- Paralleled converters on common AC and DC buses: load sharing, zero-sequence and circulating-current control, interleaving
- Weak-grid (low-SCR) stability analysis and small-signal or impedance-based methods
- Grid-integration testing at a national lab or accredited facility
- Hands-on use of PSCAD, MATLAB/Simulink or real-time simulation (RTDS, OPAL-RT, Typhoon HIL)
- ERCOT interconnection experience (NOGRR 245 / 282, large-load ride-through)
- Experience working with an inverter OEM's firmware and parameter sets as the customer, not only as the designer
- AutoCAD and protection settings coordination
Tools and Standards You Will Work With
- Simulation: PSCAD/EMTDC and PSS/E study reports; OPAL-RT and Typhoon HIL results
- Test and analysis: Power analyzers, high-speed DAQ, scopes, Python/MATLAB
- Grid codes: IEEE 2800, IEEE 1547 / UL 1741 SB, ERCOT Nodal Operating Guides, NERC reliability guidelines
- UPS: IEC 62040-3
- Equipment: MW-scale liquid-cooled PCS, 1.5 kV DC battery systems, MV transformers
For US-based roles - What you’ll get:
- Competitive salary + annual performance-based bonus eligibility
- Medical, dental, and vision insurance
- 401(k) with company match
- Paid time off and company holidays
For Mexico-based roles - What you’ll get:
- Competitive salary + annual performance bonus eligibility
- Christmas Bonus (Aguinaldo): 30 days
- Major medical expenses and life insurance
- Paid time off and holidays (per local policy)
For all roles:
- Professional development and growth opportunities
- Opportunity to grow with a mission-driven team shaping the future of clean energy
- Equal Opportunity: ON.energy is committed to equal employment opportunity and to maintaining a work environment free of harassment, discrimination, or retaliation.
- Benefits vary by role and location and are subject to change.
Agency Notice: ON.energy does not accept unsolicited resumes from staffing agencies, search firms, or third-party recruiters. Resumes submitted without a fully executed Master Services Agreement (MSA) and a written request from an authorized member of our Talent Acquisition team will be considered the property of ON.energy. No placement fees or compensation will be paid for unsolicited candidate submissions.
Apply for this job
*
indicates a required field

